VersaPNT Resilient Position, Navigation & Timing Solution
Key Features
- GNSS Time & Frequency.
- Jamming & Spoofing Detection.
- Compatible With External IMUs.
- MIL-STD-810G (Low SWaP).
- VICTORY Compatible.
- Conduction-cooled (VITA 75).
Overview
The VersaPNT combines a GNSS receiver, inertial measurement technology and high-performance timing oscillators to provide Assured PNT in GNSS-degraded and denied environments.
This rugged and highly customisable device serves as a navigation system, master clock and network time server for mobile applications in harsh environmental conditions.
Pricing Available Upon Request
Need Assistance?
- +44 (0)1527 512 400
Specifications
System
DCLS Configurable (Up to 4 x TTL outputs / 1 x 10 V output):
1PPS (Any pulse up to 10 MHz).
IRIG DCLS (A, B, E, G, NASA-36) (HaveQuick).
RS232 and RS485:
NMEA 0183 time and position messages.
HaveQuick.
Frequency:
10 MHz sine (+0 dBm / SMA connector).
Network Interface (10/100/1000bT):
NTP server (v3 / v4).
PTP IEEE1588 (v1 / v2 master).
Timing & Frequency Performance:
Refer toTiming and Frequency Performance table on the datasheet.
Navigation Performance:
Refer toNavigation Performance table on the datasheet.
1PPS time of day available (hot start):
60 s (1ms accuracy to UTC).
200 s (1µs accuracy to UTC).
Additional GNSS Protection:
Optional GNSS spoofing/jamming detection.
AJAS antenna-compatible (obtained separately).
Network Security:
Password protected administration accounts.
SSL/SSH-based https, ftps protocols supported for secured access to user interface.
NTP implementation supports MD5 (Autokey).
I/O
GNSS L1, 72 Channel Receiver (SAASM GPS L1/L2 optional):
SMA connector (5V DC to GNSS antenna).
Serial data for AJAS antenna.
SAASM adds key-load port.
DCLS Configurable Inputs (TTL level / 10 V):
1PPS.
IRIG DCLS (A, B, G, NASA-36) (HaveQuick).
Time of Day Message (NMEA0183 / HaveQuick):
Over RS232, RS485.
Network Inputs:
NTP Stratum 2.
IEEE1588 v2 Slave.
External IMU:
Serial data input.
Power
Input Voltage:
10-32 VDC.
Typical Power Draw:
<25 W (With OCXO)
Standby mode (Only oscillator is powered):
0.4 W / DC power supply must be within 10 – 32 VDC.
Environmental
Operating Temperature:
-40°C to +71°C with OCXO (-10°C to +45°C with mRO-50).
Storage Temperature (Mounting plate):
-45°C to +85°C.
Humidity:
95% RH (Non-condensing).
Altitude:
45,000 ft.
IP Rating:
IP 65.
Vibration:
MIL-STD-810G CH1 Method 514.7 (Categories 12,13,14,20,21,24).
Shock:
20 g (11 ms / Sawtooth).
Certification:
RoHS / WEEE compliant.
Mechanical
Mounting:
On a plate, optimized for conduction cooling (6 Through holes).
Tested to MIL-STD-810G CH1.
Dimensions:
(W) 147.3 x (H) 127.5 x (D) 63.0 mm (VITA 75 Compliant).
Weight:
1.0 kg.
Other Features
User (Local):
Power and Status LEDs on front panel.
ASCII Command Line Interface (USB).
User (Remote / LAN):
Status.
Configuration
Event log.
Software update through web pages.
Machine (Remote / LAN):
SNMP v2, v3 (Get, set, traps).
JSON RPC.
NTP v2, v3, v4:
Conforms with or exceeds RFC 1305 and RFC 5905.
Supports unicast, broadcast, multicast, peering, stratum 2, MD5 encryption, autokey.
PTP v1 & v2 (Master):
Conforms with default profile IEEE 1588. Supports layer2 / layer 3, unicast / multicast.
Optional: VICTORY Interface compatible.
Documentation & Support
- Documents & Drivers
- Need Help? Get In Touch
- Talk to a solution specialist we're here to make sure you get your right fit solution.
- +44 (0)1527 512400
- computers@steatite.co.uk
- Check out our latest insights
Need a Custom Solution?
Get in touch with our technical specialists to discuss your specific requirements and see if we can offer a solution.