GPSdome2M: Non-ITAR GNSS Multi-Band 4-Element Anti-Jammer

SKU: GPSdome2M

Key Features

Overview

The infiniDome GPSdome2M is the industry’s first high-end anti-jamming and fully retrofit solution tailored for defending manned and unmanned Ground Vehicles, drones and small-med UAVs from jamming attacks.

Fully retrofit, it is compatible with almost any GNSS off the shelf receiver.

Using up to 4 off-the-shelf active antennas, with dual-band protection (GPS L1+L2 or GPS L1+Glonass G1) it protects from up to 3 jamming directions simultaneously in each band.

With optional mil-spec compliance, it is the only anti-jamming solution relevant for smaller and lighter platforms.

Pricing Available Upon Request

Please Contact For Lead Time

Specifications

System

Protected Signal:
L1+G1 or L1+L2.

Latency:
~100ns.

Compression Point:
P1dB -25dBm.

Insertion Loss:
6dB.

Antenna Connectors:
50Ω SMA
2.5VDC-5VDC (Active antenna with gain range between 26dB to 32dB).

Receiver Connector (R):
50Ω SMA.

EPS Product Wire:
5VDC – 32VDC (Red).
GND (Black).
Dry Contact (2 Wires) (Dry Contact + Yellow / Dry contact – White).
UART (3.3V) (RX Blue / TX Brown / GND Black).

Optional Connector (MR11WS06 0210 BK1 E1AP 1):
5VDC – 32VDC (Pin 5).
GND (Pin 9).
Dry Contact (Dry Contact Pin 2 / Dry contact + 4).
UART (3.3V) (RX Pin 7 / TX Pin 8 / GND Pin 6).

LED Indication:
Constant Red (System Error).
Flashing Red (System Initialization).
Constant Green (System Operating) (No jamming detected).
Alternating Between Orange & Green (System Operating) (Jamming detected).

MIL-STD-810G:
chg1, Method 501.6 and 502.6, Procedure I and II
and as shown herein (-40°C to +71°C), Method 514.7 Category 7 Table 514.7Cvi– General exposure, method 516.6 procedure I, II, III.

MIL-STD-810H:
Method 514.8 Category 4, Figure 514.8C-3, Table 514.8C-II in all axes, Figure 514.8 C-7.

MIL-STD-461F/G:
TBC.

Operating Temperature Range:
-40°C to 71°C.

Waterproof Rating:
IP65.

Certification:
RoHS Compliant.
CE Compliant.
FCC Compliant.
UKCA Compliant.

Dimensions:
99.4 x 95.7 x 56 mm (Excluding mounting legs).

Weight:
500g.

Mounting:
4 x 8-32 bolts (Not supplied).

Documentation & Support

Need a Custom Solution?

Get in touch with our technical specialists to discuss your specific requirements and see if we can offer a solution.

Scroll to Top

Add Your Heading Text Here